Still Can’t Connect And Use 150mb At N15 MTN Musicplus Plan On Android? Let’s Assist You Further

We have noticed that many of you out there are still finding it difficult to connect and use the 150mb at N15 MTN musicplus plan to browse on their android using Psiphon or other common VPN that you have been using in the BBLITE era.

Some of you after trying it out and failing to connect, they jump into conclusion that it doesn’t work.

The tweak is currently blazing if all the Psiphon parameters are set right, but we must acknowledge that the very first time connection can sometimes be a bone in the neck.

After the first difficult hard connect section, your subsequent connections become easy and smooth ride, perhaps you have not exhausted the allotted 150mb musicplus data.

Must Read: Airtel launches new data plan –Smart Speedoo

Now, what we will be doing here is that we are going to be dropping the full load down of the Psiphon settings that give best connection result.

On your part, what you should do is to adjust your settings to these current settings if yours is not in-line with these.

Without further ado, here are the best currently working Psiphon settings for the 150mb at N15 musicplus data use your android browsing.

We presumed you have already subscribed to MTN 150mb musicplus data at N15

·     For those who don’t have Psiphon yet, you can download Psiphon Pro here for best result

·     After download and installation, launch the Psiphon app and set it up as given below

·     Come down to Proxy Type then tap and choose Real Host

·     Come down to Proxy Server and input musicplus.mtnonline.com

·     Now scroll down to Real Proxy Type and tap the default to select HTTP

·     Under Real Proxy Server input 10.199.212.2 and 8080 for Real Proxy Port

·     Then scroll down to the bottom and click Save

·     If you downloaded Psiphon for the first time, Immediately you click save, a pop up message will appear requesting to use Tunnel whole device, just tap on the option to Tunnel Whole Device to bring you to the next phase

·     Here choose the Option Menu

·     Under this Option menu, you will see select region, tap and select Germany

·     Still on the Option menu, you will see the More Option tab below, tap it and then come under proxy Settings and tick the Connect through an HTTP checkbox

·     Still on the More Option, select Use the following settings

·     Then come down to Host Address and input 10.199.212.2 and 8080 for Port

·     Under Port tick the box for Use proxy authentication

·     Go back now to the main page (homepage) of the Psiphon and tap the start button below, you will get a warning message, tick the box and allow Psiphon to run and wait for it to connect, it will connect and after that just minimize and fire up any browser or app.

Recommended: Beware! Glo joins data zappers league

Now, if it fails to connect, just exit the psiphon, refresh your network by switching off data and switching it on again, and then launch your Psiphon and try connecting again.

as we said, that sometimes on the first connection, you might witness hard connect, meaning you have to try reconnecting on several attempts by refreshing your network.

But after it finally connects, subsequent connection becomes easier.

You should note that it is only 150mb and since MTN no longer shows your remaining data, it is your duty to monitor your data usage yourself to know when you have exhausted it, so you can re-subscribe again.